Items where Subject is "Engineering"

.

., Mahmudova Z.A. (2024) Investigation of Devices for Measuring the Quality of Electrical Energy. Journal of Engineering Research and Reports, 26 (11). pp. 36-45. ISSN 2582-2926

., Tukimun and Oktaviani, Viva and ., Musrifah (2024) Analysis of Traffic Impact Due to Construction of Village Government Offices on MT Haryono Road Samarinda City, Indonesia. Journal of Engineering Research and Reports, 26 (8). pp. 301-315. ISSN 2582-2926

A

A., Atta and A., M. Abdel Reheem and M., M. Abdel Rahman (2014) Effect of Argon plasma and ion beam on the morphology and wettability of polyethylene terephthalate (PET). Journal of Engineering and Technology Research, 6 (2). pp. 18-26. ISSN 2006-9790

Achilli, Gabriele Maria and Logozzo, Silvia and Malvezzi, Monica and Valigi, Maria Cristina (2022) Contact mechanics analysis of a soft robotic fingerpad. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Adamu, M.O. (2013) A comparative study of meta-heuristics for identical parallel machines. Journal of Engineering and Technology Research, 5 (7). pp. 207-216. ISSN 2006-9790

Almarei, Maen and Daqrouq, Khaled (2020) The Study of Recognition Methods Based on Wavelet Transform for Melanoma Detection. Journal of Engineering Research and Reports, 11 (3). pp. 46-61. ISSN 2582-2926

B

Baumann, Markus and Koch, Christian and Staudacher, Stephan (2022) Application of Neural Networks and Transfer Learning to Turbomachinery Heat Transfer. Aerospace, 9 (2). p. 49. ISSN 2226-4310

Boateng, Eric and Kankam, Charles K. and Danso, Anthony K. (2023) Models for Predicting Strength Reduction Factors for Concrete that Utilizes Palm Kernel Shells and Waste Automobile Tires as Aggregates. Journal of Engineering Research and Reports, 24 (9). pp. 44-53. ISSN 2582-2926

Boudlal, Abdelaziz and Liapidevskii, Valery (2012) Modulation Equations for Roll Waves on Vertically Falling Films of a Power-Law Fluid. World Journal of Mechanics, 02 (01). pp. 1-8. ISSN 2160-049X

C

Chen, Shengyang and Zhou, Weifeng and Yang, An-Shik and Chen, Han and Li, Boyang and Wen, Chih-Yung (2022) An End-to-End UAV Simulation Platform for Visual SLAM and Navigation. Aerospace, 9 (2). p. 48. ISSN 2226-4310

Chi, Weichao and Ma, He and Wang, Caihua and Zhao, Tianyu (2021) Research on Control of Stewart Platform Integrating Small Attitude Maneuver and Vibration Isolation for High-Precision Payloads on Spacecraft. Aerospace, 8 (11). p. 333. ISSN 2226-4310

Colagrossi, Andrea and Lavagna, Michèle (2022) Fault Tolerant Attitude and Orbit Determination System for Small Satellite Platforms. Aerospace, 9 (2). p. 46. ISSN 2226-4310

D

Dai, Wei and Liang, Kui and Wang, Bin (2021) State Monitoring Method for Tool Wear in Aerospace Manufacturing Processes Based on a Convolutional Neural Network (CNN). Aerospace, 8 (11). p. 335. ISSN 2226-4310

Di Leone, Domenico and Lo Balbo, Francesco and De Gaspari, Alessandro and Ricci, Sergio (2021) Model Updating and Aeroelastic Correlation of a Scaled Wind Tunnel Model for Active Flutter Suppression Test. Aerospace, 8 (11). p. 334. ISSN 2226-4310

E

Eddy, Pondi Pius and Chuka, Nwigbo Solomon and Omeiza, Obende Eziekel and Chukwuemeka, Olisakwe Henry and Peter, Chikelu Okechukwu and Andrew, Azaka Onyemazuwa (2021) Dynamic Analysis of Fatigue Life Prediction on the Shafts of a Modern Cassava Peeling Machine for Safe and Economic Use. Journal of Engineering Research and Reports, 20 (4). pp. 117-130. ISSN 2582-2926

El-Maaty, Ahmed E. Abu and Ouf, Mohammed E. and Shahrah, Saddam (2020) Effect of Polymer Additive on Nano Materials Modified Asphalt Mixtures. Journal of Engineering Research and Reports, 11 (3). pp. 20-29. ISSN 2582-2926

F

Fardi, Hamid (2024) Modeling High Blocking Voltage and Doping in 4H Silicon Carbide Bipolar Junction Transistors. In: Current Approaches in Engineering Research and Technology Vol. 3. B P International, pp. 170-187. ISBN 978-81-973454-0-1

Franco Correia, Victor and Moita, José S. and Moleiro, Filipa and Soares, Cristóvão M. Mota (2021) Optimization of Metal–Ceramic Functionally Graded Plates Using the Simulated Annealing Algorithm. Applied Sciences, 11 (2). p. 729. ISSN 2076-3417

Franzmann, Christian and Leopold, Friedrich and Mundt, Christian (2022) Low-Interference Wind Tunnel Measurement Technique for Pitch Damping Coefficients at Transonic and Low Supersonic Mach Numbers. Aerospace, 9 (2). p. 51. ISSN 2226-4310

G

Gao, Yadong and Xu, Yang (2022) The Overall Design of Variable Diameter Ducted Fan in the Aircraft. Aerospace, 9 (7). p. 387. ISSN 2226-4310

Gao, Yadong and Yu, Xinyu and Chen, Likun and Huang, Dawei (2022) Impact Load Identification Algorithm of Helicopter Weapon Pylon Based on Time-Domain Response Signal. Aerospace, 9 (7). p. 388. ISSN 2226-4310

Gitterman, Moshe (2012) Oscillator with Random Mass. World Journal of Mechanics, 02 (02). pp. 113-124. ISSN 2160-049X

H

Hao, Zhang (2024) Design of Integrated System for the Comprehensive Utilization of Yellow River Sediment-Sealing Machine Structure and Control System Design. Journal of Engineering Research and Reports, 26 (9). pp. 206-213. ISSN 2582-2926

Hwang, Myeong-Hwan and Kim, Young-Gon and Lee, Hae-Sol and Kim, Young-Dae and Cha, Hyun-Rok (2021) A Study on the Improvement of Efficiency by Detection Solar Module Faults in Deteriorated Photovoltaic Power Plants. Applied Sciences, 11 (2). p. 727. ISSN 2076-3417

I

Idiapho, Clement A. and Awwal, Sani I. (2020) Investigative Analysis of Marine Tugboat Accident in Nigeria. A Case Study of Bayelsa, Delta and Rivers State. Journal of Engineering Research and Reports, 11 (3). pp. 30-45. ISSN 2582-2926

Ishikawa, Shiro (2012) Ergodic Hypothesis and Equilibrium Statistical Mechanics in the Quantum Mechanical World View. World Journal of Mechanics, 02 (02). pp. 125-130. ISSN 2160-049X

J

Jiang, Wei and Xie, Weicheng and Sun, Shuai (2022) Parametric Optimisation Analysis of Micro/Nano-Satellite Flywheels Based on the NSGA-Ⅱ Optimisation Algorithm. Aerospace, 9 (7). p. 386. ISSN 2226-4310

Jr., E. Graycochea and Bacquian, B. C. and Gomez, F. R. (2020) Process Enhancement to Eliminate Adhesive Film Remains during Die Picking. Journal of Engineering Research and Reports, 11 (3). pp. 1-4. ISSN 2582-2926

K

Kao, Alexander P. and Khan, Shaz and Barber, Asa H. (2018) Abrasion Induced Volume Loss in Porcine Teeth Measured Using X-Ray Microtomography. Frontiers in Mechanical Engineering, 4. ISSN 2297-3079

Khan, Basheer and Eastman, Shanomae and Yearwood, Abdu and Sharief, Safrawz and Norton, Shion and Quintyn, Colin and Liu, Stephen and Jagnandan, Shawn and Jagnandan, Antalov (2024) Efficient Removal of Welding Fumes in Guyana: Design and Computational Fluid Dynamics Approach. In: Current Approaches in Engineering Research and Technology Vol. 3. B P International, pp. 68-96. ISBN 978-81-973454-0-1

Kim, Junghyun and Lee, Kyuman (2021) Unscented Kalman Filter-Aided Long Short-Term Memory Approach for Wind Nowcasting. Aerospace, 8 (9). p. 236. ISSN 2226-4310

M

Marmorino, George O. and Smith, Geoffrey B. and North, Ryan P. and Baschek, Burkard (2018) Application of Airborne Infrared Remote Sensing to the Study of Ocean Submesoscale Eddies. Frontiers in Mechanical Engineering, 4. ISSN 2297-3079

Molkens, Tom and Van Gysel, Ann (2021) Structural Behavior of Floor Systems Made by Floor Plates—Mechanical Model Based on Test Results. Applied Sciences, 11 (2). p. 730. ISSN 2076-3417

N

Nguyen, Thien An and Lee, Jaejin (2021) Modified Viterbi Algorithm with Feedback Using a Two-Dimensional 3-Way Generalized Partial Response Target for Bit-Patterned Media Recording Systems. Applied Sciences, 11 (2). p. 728. ISSN 2076-3417

O

Ogungbemi, Olumide Samuel (2024) Smart Contracts Management: The Interplay of Data Privacy and Blockchain for Secure and Efficient Real Estate Transactions. Journal of Engineering Research and Reports, 26 (8). pp. 278-300. ISSN 2582-2926

Okninski, Adam and Surmacz, Pawel and Bartkowiak, Bartosz and Mayer, Tobiasz and Sobczak, Kamil and Pakosz, Michal and Kaniewski, Damian and Matyszewski, Jan and Rarata, Grzegorz and Wolanski, Piotr (2021) Development of Green Storable Hybrid Rocket Propulsion Technology Using 98% Hydrogen Peroxide as Oxidizer. Aerospace, 8 (9). p. 234. ISSN 2226-4310

Omari, Arthur M. and John, John P. and Kichonge, Baraka (2020) Simulation and Optimization of Municipal Solid Waste Combustion: A Case Study of a Fixed Bed Incinerator. Journal of Engineering Research and Reports, 11 (3). pp. 5-19. ISSN 2582-2926

P

Pan, Guangtang and Jia, Qingxuan and Chen, Gang and Li, Tong and Liu, Chuankai (2021) A Control Method of Space Manipulator for Peg-in-Hole Assembly Task Considering Equivalent Stiffness Optimization. Aerospace, 8 (10). p. 310. ISSN 2226-4310

Pohling, Oliver and Schier-Morgenthal, Sebastian and Lorenz, Sandro (2022) Looking into the Crystal Ball—How Automated Fast-Time Simulation Can Support Probabilistic Airport Management Decisions. Aerospace, 9 (7). p. 389. ISSN 2226-4310

Pulido, J. and Rodriguez, R. and Gomez, F. R. and Jr., E. Graycochea (2021) Mitigating Wire Short Defect on LGA Device through Substrate Design Optimization. Journal of Engineering Research and Reports, 20 (4). pp. 85-88. ISSN 2582-2926

Purushotham, B. and Rao, Ch. D. V. Subba (2024) Proposal of a Scheme Integrating QMN Technique with Buffer Overflow Control Strategy to Mitigate Packet Loss in Mobile Ad Hoc Network. In: Current Approaches in Engineering Research and Technology Vol. 3. B P International, pp. 52-67. ISBN 978-81-973454-0-1

R

Rahikainen, Ahti and Avela, Janne and Virmavirta, Mikko (2012) Modeling the Force-Velocity Relationship in Arm. World Journal of Mechanics, 02 (02). pp. 90-97. ISSN 2160-049X

Rebora, Manuela and Salerno, Gianandrea and Piersanti, Silvana and Saitta, Valerio and Gorb, Elena and Gorb, Stanislav N. (2022) Mechanical interaction of the egg parasitoid Anastatus bifasciatus (Hymenoptera: Eupelmidae) with artificial substrates and its host egg. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Rems, Florian and Frei, Heike and Risse, Eicke-Alexander and Burri, Matthias (2021) 10-Year Anniversary of the European Proximity Operations Simulator 2.0—Looking Back at Test Campaigns, Rendezvous Research and Facility Improvements. Aerospace, 8 (9). p. 235. ISSN 2226-4310

Rodriguez, Rennier S. and Gomez, Frederick Ray I. (2021) Addressing Delamination through Advanced Semiconductor Die Design. Journal of Engineering Research and Reports, 20 (4). pp. 142-146. ISSN 2582-2926

S

Shalangwa, D. A and Malgwi, D. I. (2014) Investigation of self-similar nature of video streaming traffic in corporate network. Journal of Engineering and Technology Research, 6 (2). pp. 13-17. ISSN 2006-9790

Sharma, Jagan Nath and Sharma, N. (2012) 3-D Exact Vibration Analysis of a Generalized Thermoelastic Hollow Sphere with Matrix Frobenius Method. World Journal of Mechanics, 02 (02). pp. 98-112. ISSN 2160-049X

Shettigar, N. and Truong, M. and Thyagarajan, A. and Bamido, A. and Banerjee, Debjyoti (2021) Application of Machine Learning (ML) for Enhancing the Transient Performance of Thermal Energy Storage (TES) Platforms Using Radial Basis Function (RBF). Journal of Engineering Research and Reports, 20 (4). pp. 70-84. ISSN 2582-2926

Sun, Yan Q. (2018) Mitigating Train Derailments Due to Sharp Curve and Overspeed. Frontiers in Mechanical Engineering, 4. ISSN 2297-3079

T

Tserpes, Konstantinos and Papadopoulos, Kosmas and Unaldi, Selen and Berthe, Laurent (2021) Development of a Numerical Model to Simulate Laser-Shock Paint Stripping on Aluminum Substrates. Aerospace, 8 (9). p. 233. ISSN 2226-4310

U

Ukpaka, P. (2013) Responses application to monitor and predict crude oil distillation rate using pneumatic control system on a furnace. Journal of Engineering and Technology Research, 5 (7). pp. 217-229. ISSN 2006-9790

V

Valentin, Marvin T. and Smeets, Alex and Ciolkosz, Daniel E. and Jasinskas, Algirdas and Onalan, Milagros B. and Dulay, Alvin C. and Dumalhin, Leonardo D. and Sudaypan Sr., Constantino T. and Anongos Jr., Stanley F. and Launio, Cheryll C. and Galad, Marlon N. and Suclad, Roger Lee M. and Pagnas, Keithler M. (2021) Concept Design of a Portable Carrot Seeder. Journal of Engineering Research and Reports, 20 (4). pp. 131-141. ISSN 2582-2926

W

Wang, Zehong and Han, Xiaolong and Chen, Yanru and Ye, Xiaotong and Hu, Keli and Yu, Donghua (2022) Prediction of Willingness to Pay for Airline Seat Selection Based on Improved Ensemble Learning. Aerospace, 9 (2). p. 47. ISSN 2226-4310

X

Xiang, Xiaohan and Yamada, Yoji and Akiyama, Yasuhiro and Tao, Ziliang and Kudo, Naoki (2021) Validation of Lumbar Compressive Force Simulation in Forward Flexion Condition. Applied Sciences, 11 (2). p. 726. ISSN 2076-3417

Y

Yang, Qizhi and Zhang, Ruoyu and Jia, Cuiping and Li, Zhangyan and Zhu, Menglan and Addy, M. (2022) Study of dynamic hole-forming performance of a cup-hanging planter on a high-speed seedling transplanter. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Yuan, Ziwei and Yang, Yanping and Wang, Dong and Ma, Xiaoping (2022) Energy-Efficient Trajectory Optimization for UAV-Enabled Cellular Communications Based on Physical-Layer Security. Aerospace, 9 (2). p. 50. ISSN 2226-4310

Yusuf, A. Z. and Zakir, A. and Mustapha, S. I. and Halima, S. A. and Nuhu, M. (2014) Computational screening of ionic liquids as solvents for reprocessing of spent nuclear fuel. Journal of Engineering and Technology Research, 6 (1). pp. 6-12. ISSN 2006-9790

Z

Zhao, Xifan and Wang, Yanjun and Li, Lishuai and Delahaye, Daniel (2022) A Queuing Network Model of a Multi-Airport System Based on Point-Wise Stationary Approximation. Aerospace, 9 (7). p. 390. ISSN 2226-4310